JAMB Chemistry Syllabus 2023/2024 for UTME Examination.
This article is all about Jamb latest syllabus for Chemistry. Firstly, what is Syllabus? A syllabus is a document that outlines everything that will be covered in an examination or class. However, Jamb Syllabus is a list of outlined topic that student is required to read to get prepared for the Unified Tertiary Matriculation Examination.
JAMB Chemistry Syllabus: If you are getting prepared for the Unified Tertiary Matriculation Examination conducted by the Joint Admission Matriculation Board then you have nothing to fair. Newsedung.com will provide all the necessary guides that will help the student to come out in flying colors excluding expos.
If you are participating in the upcoming UTME (Unified Tertiary Matriculation Examination), and you need the Jamb Chemistry outlines topic that needs to be read for the preparation of the Jamb Examination, then I guess this article is for you;
Steps to take before obtaining the 2023/2024 Jamb Form;
- Choice a course
- Make a research on the course
- Search for the O’level requirement for the course
- Then Lastly, Check the Jamb Subject combination of the course if Chemistry is among the subject combination of the course you wish to study then you are good to go.
Jamb Chemistry Syllabus 2023/2024 General Objective
The aim of the Unified Tertiary Matriculation Examination (UTME) syllabus in Chemistry is to prepare the candidates for the Board’s examination. It is designed to test their achievement of the course objectives, which are to:
- Apply the basic principles governing scientific methods in new situations;
- Interpret scientific data;
- Deduce the relationships between chemistry and other sciences;
- Apply the knowledge of chemistry to industry and everyday life.
Jamb Syllabus for Chemistry 2023/2024
1. Separation of Mixtures and Purification of Chemical Substance
(a) Pure and impure substances
(b) Boiling and melting points.
(c) Elements, compounds, and mixtures
(d) Chemical and physical changes.
(e) Separation processes: evaporation, simple and fractional distillation, sublimation, filtration, crystallization, paper and column chromatography, simple and fractional crystallization.
2. Chemical Combination
Stoichiometry, laws of definite and multiple proportions, the law of conservation of matter, Gay Lussac’s law of combining volumes, Avogadro’s law; chemical symbols, formulae, equations and their uses, relative atomic mass based on 12C=12, the mole concept, and Avogadro’s number.
3. Kinetic Theory of Matter & Gas Law
(a) An outline of the kinetic theory of matter, melting, vaporization and reverse processes; melting and boiling explained in terms of molecular motion and Brownian movement.
(b) The laws of Boyle, Charles, Graham and Dalton (law of partial pressure); combined gas law, molar volume and atomicity of gases
4. Atomic Structure & Bonding
(a) (i)The concept of atoms, molecules and ions, the works of Dalton, Millikan, Rutherford, Mosely, Thompson and Bohr. Simple hydrogen spectrum, Ionization of gases illustrating the electron as a fundamental particle of matter.
(ii) Atomic structure, electron configuration, atomic number, mass number and isotopes; specific examples should be drawn from elements of atomic number 1 to 20. Shapes
of s and p orbitals.
(b) The periodic table and periodicity of elements, presentation of the periodic table with a view to recognizing families of elements e.g. alkali metals, halogens, the noble gases, and transition metals. The variation of the following properties should be noticed: ionization energy, ionic radii, electron affinity, and electronegativity.
(c) Chemical bonding: Electrovalency and covalency, the electron configuration of elements, and their tendency to attain the noble gas structure. Hydrogen bonding and metallic bonding as special types of electrovalency and covalency respectively; coordinate bond as a type of covalent bond as illustrated by complexes like [Fe(CN)6]3-, [Fe(CN)6]4-, [Cu(NH3)4]2+and [Ag(NH3)2]+; van der Waals’ forces should be mentioned as a special type of bonding forces.
(d) Shapes of simple molecules: linear ((H2, 02, C12,HCI and CO2), non-linear (H2O) and
(e) Nuclear Chemistry:
(i) Radioactivity (elementary treatment only)
(ii) Nuclear reactions. Simple equations, uses and applications of natural and artificial radioactivity.
The usual gaseous constituents – nitrogen, oxygen, water vapor, carbon (IV) oxide and the noble gases (argon and neon), the proportion of oxygen in the air e.g. by burning phosphorus or by using alkaline pyrogallol, air as a mixture, and some uses of the noble gas.
Composition by volume: Water as a solvent, atmospheric gases dissolved in water, and their biological significance. Water is a product of the combustion of hydrogen. Hard and soft water: Temporary and permanent hardness and methods of softening hard water. Purification of town water supplies. The water of crystallization, efflorescence, deliquescence, and hygroscopy. Examples of the substances exhibiting these properties and their uses.
(a) Unsaturated, saturated and supersaturated solutions. Solubility curves and simple deductions from them, (solubility defined in terms of mole per dm3) and simple calculations.
(b) Solvents for fats, oil, and paints and the use of such solvents for the removal of stains.
(c) Suspensions and colloids: Harmattan haze and paints as examples of suspensions and fog, milk, aerosol spray, and rubber solution as examples of colloids.
9. Acids, Base & Salt
(a) General characteristics and properties of acids, bases and salts. Acids/base indicators,
basicity of acids, normal, acidic, basic, and double salts. An acid defined as a substance
whose aqueous solution furnishes H3O+ions or as a proton donor. Ethanoic, citric and tartaric acids as examples of naturally occurring organic acids, alums as examples of double salts, preparation of salts by neutralization, precipitation and action of acids on metals. Oxides and trioxocarbonate (IV) salts
(b) Qualitative comparison of the conductances of molar solutions of strong and weak acids and bases, relationship between conductance, amount of ions present, and their relative mobilities.
(c) pH and pOH scale. pH defined as – log[H3O+]
(d) Acid/base titrations.
(e) Hydrolysis of salts: Simple examples such as NH4C1, AICI3, Na2CO3, CH3COONa to be mentioned.
10. Oxidation and Reduction
(a) Oxidation in terms of the addition of oxygen or removal of hydrogen.
(b) Reduction as removal of oxygen or addition of hydrogen.
(c) Oxidation and reduction in terms of electron transfer.
(d) Use of oxidation numbers. Oxidation and reduction treated as change in oxidation.
number and use of oxidation numbers in balancing simple equations. IUPAC nomenclature of inorganic compounds.
(e) Tests for oxidizing and reducing agents.
(a) Electrolytes and non-electrolytes. Faraday’s laws of electrolysis.
(b) Electrolysis of dilute H2SO4, aqueous CuSO4, CuC12 solution, dilute and concentrated NaC1 solutions and fused NaC1 and factors affecting discharge of ions at the electrodes.
(c) Uses of electrolysis: Purification of metals e.g. copper and production of elements and compounds e.g. A1, Na, O2, Cl2 and NaOH.
(d) Electrochemical cells: Redox series (K, Na, Ca, Mg, AI, Zn, Fe, PbII, H, Cu, Hg, Au,)
half-cell reactions and electrode potentials. Simple calculations only.
(e) Corrosion as an electrolytic process, cathodic protection of metals, painting, electroplating and coating with grease or oil as ways of preventing iron from corrosion.
12. Energy Charge
(a) Energy changes(∆H) accompanying physical and chemical changes: dissolution of substances in or reaction with water e.g. Na, NaOH,K, NH4, Cl. Endothermic (+∆H) and exothermic (-∆H) reactions.
(b) Entropy as an order-disorder phenomenon: simple illustrations like mixing of gases and dissolution of salts.
(c) Spontaneity of reactions: ∆G0 = 0 as a criterion for equilibrium, ∆G greater or less than zero as a criterion for non-spontaneity or spontaneity.
13. Rates of Chemical Reaction
(a) Elementary treatment of the following factors which can change the rate of a chemical
(i) Temperature e.g. the reaction between HCI and Na2S2O3 or Mg and HCI
(ii) Concentration e.g. the reaction between HCl and Na2S2O3, HCl and marble and the iodine clock reactio1n, for gaseous systems, pressure may be used as concentration term.
(iii) Surface area e.g. the reaction between marble and HCI with marble in
(i) powdered form
(ii) lumps of the same mass.
(iv) Catalyst e.g. the decomposition of H2O2 or KCIO3 in the presence or absence of MnO2
(b) Concentration/time curves.
(c) Activation energy Qualitative treatment of Arrhenius’ law and the collision theory, effect of light on some reactions. e.g. halogenation of alkanes
14. Chemical Equilibrium
Reversible reactions and factors governing the equilibrium position. Dynamic equilibrium. Le Chatelier’s principle and equilibrium constant. Simple examples to include the action of steam on iron and N2O4 2NO2. No calculation will be required.
15. Non-metals and their compounds
(a) Hydrogen: commercial production from water gas and cracking of petroleum fractions, laboratory preparation, properties uses, and test for hydrogen.
(b) Halogens: Chlorine as a representative element of the halogen. Laboratory preparation, industrial preparation by
electrolysis, properties, and uses, e.g. water sterilization, bleaching, manufacture of HCl, plastics and insecticides. Hydrogen chloride and Hydrochloric acid: Preparation and properties. Chlorides and test for chlorides.
(c) Oxygen and Sulphur
(i) Oxygen: Laboratory preparation, properties and uses. Commercial production from liquid air. Oxides: Acidic,basic, amphoteric and neutral, trioxygen (ozone) as an allotrope and the importance of ozone in the atmosphere.
(ii) Sulphur: Uses and allotropes: preparation of allotropes is not expected. Preparation, properties, and uses of sulphur (IV) oxide, the reaction of SO2 with alkalis.Trioxosulphate (IV) acid and its salts, the effect of acids on salts of trioxosulphate (IV), Tetraoxosulphate (VI) acid: Commercial preparation (contact process only), properties as a dilute acid, an oxidizing and a dehydrating agents and uses. Test for SO42-. Hydrogen sulphide: Preparation and properties as a weak acid, reducing and precipitating agents. Test for S2-
(i) Laboratory preparation
(ii) Production from liquid air
(iii) Ammonia: Laboratory and industrial preparations (Haber Process only), properties and uses, ammonium salts
and their uses, oxidation of ammonia to nitrogen (IV) oxide and trioxonitrate (V) acid. Test for NH4+
(iv) Trioxonitrate (V) acid: Laboratory preparation from ammonia; properties and uses. Trioxonitrate (V) salt-action of heat and uses. Test for NO3-
(v) Oxides of nitrogen: Properties. The nitrogen cycle.
(i) Allotropes: Uses and properties
(ii) Carbon(IV) oxide, Laboratory preparation, properties and uses. Action of heat on trioxocarbonate(IV) salts and test for CO32-
(iii) Carbon(II) oxide: Laboratory preparation, properties including its effect on blood; sources of carbon (II) oxide to include charcoal, fire and exhaust fumes.
(iv) Coal: Different types, products obtained from destructive distillation of wood and coal.
(v) Coke: Gasification and uses. Manufacture of synthesis gas and uses.
16. Metals and their compounds
(a) General properties of metals
(b) Alkali metals e.g. sodium
(i) Sodium hydroxide:- Production by electrolysis of brine, its action on aluminium, zinc and lead
ions. Uses including precipitation of metallic hydroxides.
(ii) Sodium trioxocarbonate (IV) and sodium hydrogen trioxocarbonate (IV): Production by Solvay process, properties and uses, e.g. Na2CO3 in the manufacture of glass.
(iii) Sodium chloride: its occurrence in sea water and uses, the economic importance of seawater and the recovery of sodium chloride.
(c) Alkaline-earth metals, e.g. calcium; calcium oxide, calcium hydroxide and calcium trioxocarbonate (IV);
Properties and uses. Preparation of Calcium oxide from seashells, the chemical composition of cement and the setting of mortar. Test for Ca2+.
(d) Aluminium Purification of bauxite, electrolytic extraction, properties, and uses of aluminium and its compounds. Test for A13+
(e) Tin Extraction from its ores. Properties and uses.
(f) Metals of the first transition series. Characteristic properties:
(i) electron configuration
(ii) oxidation states
(iii) complex ion formation
(iv) formation of coloured ions
(g) Iron Extraction from sulphide and oxide ores, properties and uses, different forms of iron and their properties and advantages of steel over iron. Test for Fe2+ and Fe3+
(h) Copper Extraction from sulphide and oxide ores, properties and uses of copper. Preparation and uses of copper (II) Tetraoxosulphate (VI). Test for Cu2+
(i) Alloy Steel, stainless steel, brass, bronze, type-metal, duralumin, soft solder, permallory and alnico (constituents and uses only).
17. Organic Compounds
An introduction to the tetravalency of carbon, the general formula, IUPAC nomenclature and the determination of
the empirical formula of each class of the organic compounds mentioned below.
(a) Aliphatic hydrocarbons
(i) Alkanes Homologous series in relation to physical properties, substitution reaction and a few examples and uses of halogenated products. Isomerism: structural only (examples on isomerism should not go beyond six carbon atoms). Petroleum: composition, fractional distillation and major products; cracking and reforming, Petrochemicals – starting materials of organic syntheses, quality of petrol and meaning of octane number
(ii) Alkenes Isomerism: structural and geometric isomerism, additional and polymerization reactions, polythene
and synthetic rubber as examples of products of polymerization and its use in vulcanization.
(iii) Alkynes Ethyne – production from action of water on carbides, simple reactions and properties of ethyne.
(b) Aromatic hydrocarbons e.g. benzene – structure, properties and uses.
(c) Alkanols Primary, secondary, tertiary – production of ethanol by fermentation and from petroleum by-products. Local examples of fermentation and distillation, e.g. gin from palm wine and other local sources and glycerol as a polyhydric alkanol. Reactions of OH group – oxidation as a distinguishing test among primary, secondary and tertiary alkanols (Lucas test)
(d) Alkanals and alkanones. Chemical test to distinguish between alkanals and alkanones.
(e) Alkanoic acids. Chemical reactions; neutralization and esterification, ethanedioic (oxalic) acid as an example of a dicarboxylic acid and benzene carboxylic acid as an example of an aromatic acid.
(f) Alkanoates Formation from alkanoic acids and alkanols – fats and oils as alkanoates. Saponification: Production of soap and margarine from alkanoates and distinction between detergents and soaps.
(g) Amines (Alkanamines) Primary, Secondary, and tertiary
(h) Carbohydrates Classification – mono-, di- and polysaccharides; composition, chemical tests for simple sugars and reaction with concentrated tetraoxosulphate (VI) acid. Hydrolysis of complex sugars e.g. cellulose from cotton and starch from cassava, the uses of sugar and starch in the production of alcoholic beverages, pharmaceuticals and
(i) Proteins: Primary structures, hydrolysis and tests (Ninhydrin, Biuret, Millon’s and xanthoproteic) Enzymes and their functions.
(j) Polymers: Natural and synthetic rubber; addition and condensation polymerization. Methods of preparation, examples, and uses. Thermoplastic and thermosetting plastics.
18. Chemistry and Industry
Chemical industries: Types, raw materials, and relevance; Biotechnology.
Jamb Chemistry Syllabus Recommended Textbook
- Ababio, O.Y. (2005). New School Chemistry for Senior Secondary Schools, (Third Edition),
Onitsha: Africana FIRST Publishers Limited
- Bajah, S.T. Teibo, B.O., Onwu, G and Obikwere, A. (1999). Senior Secondary Chemistry,
Book 1, Lagos: Longman
- Bajah, S.T., Teibo, B.O., Onwu, G and Obikwere, A. (2000). Senior Secondary Chemistry,
Books 2 and 3, Lagos: Longman
- Ohia, G.N.C., Adewoyin, F.A. and Akpan, B.B. (1997). Exam Focus Chemistry for WASSCE
& JME: Ibadan: University Press Plc
- STAN (1987). Chemistry for Senior Secondary Schools, Ibadan: Heinemann
- Sylvester: O.O. (2004). A Comprehensive Practical Chemistry for Senior Secondary Schools,
- Uche, I.O., Adenuga, I.J. and Iwuagwu, S.L. (2003). Countdown to WASSCE/SSCE, NECO, JME Chemistry,
- Wisdomline Pass at Once JAMB.
IF YOU FIND THIS ARTICLE HELPFUL SOMEONE MIGHT ALSO NEED IT SO DON’T HESITATE TO SHARE.
THANKS FOR VISITING NEWSEDUNG, LEAVE A COMMENT BEFORE CLOSING THE TAB.